2-legged stirrup calculator | Different Shapes of Stirrups | Types Of Stirrups Used In Beam And Columns| Steps involved in finding the cutting length
2-legged stirrup calculator | Different Shapes of Stirrups | Types Of Stirrups Used In Beam And Columns| Steps involved in finding the cutting length of stirrups
2-legged stirrup calculator :
The 2-legged stirrup calculator for the MKS & FPS system is given separately. Calculate according to your requirements.
.png "2-legged stirrup calculator | Different Shapes of Stirrups | Types Of Stirrups Used In Beam And Columns| Steps involved in finding the cutting length of stirrups")
A stirrup is a closed rebar loop that is used to hold the main rebar together in an RCC structure. In one column, the stirrups provide lateral support to the main bars against buckling.
Different Shapes of Stirrups:
1) Rectangular Stirrups
2) Square Stirrups
3) Circular Stirrups
4) Triangular Stirrups
5) Spiral Stirrups
6) Diamond Stirrups
Types Of Stirrups Used In Beam And Columns:
1) Single Legged Stirrups(Open stirrup)
2) Two-legged or Double Legged Stirrups (Closed Stirrup)
3) Four-legged Stirrups (Closed Stirrup)
4) 6-legged Stirrups (Closed Stirrup)
Steps involved in finding the cutting length of stirrups:
1) Look at the size of column or beam from drawings
2) Adopt Dia of the bar (generally 8mm Dia is used for stirrups)
3) Deduct the concrete cover or clear cover
4) Find the total outer length of stirrup after deducting concrete cover.
5) Add the length of the hook to the length of the stirrup
6) Deduct the length of bends
7) Use below formula to find the total cutting length of stirrups
Note:
This calculation tool has been created with the greatest possible care. However, we cannot be held liable for its correctness.
QUIZ PRACTICE
RCC
RCC-1 -Click here
RCC-2- Click here
𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘
SOM/MOS
𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘
𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘
𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘𐩘
.png)
COMMENTS